switel BCF4368 Manual Del Usuario página 12

Note 1: Only NiMH rechargeable batteries may be charged with the monitor's
charging system. The use of the wrong battery types may lead to an
explosion.
Note 2: The batteries may also be charged with chargers specifically designed for
this purposes.
Note 3: The battery charging indicator LED flashes in green indicates that
recharging of the batteries is necessary.
Using AC Power
1. Plug one end of the provided power adapter into a wall outlet and the other end
into the bottom of the monitor. See Fig. 9.
Note: Use the adapter labeled OUTPUT: 6V DC with the monitor.
2. Slide the POWER switch to the ON position. The LED on the monitor
will light up. See Fig. 9.
3. Adjust the volume to a comfortable level.
2
Other applications
.2
Recording on a VCR
1. The monitor comes with an AV (audio/video) output jack for connecting to a
VCR for recording.
2. Connect the mini plug of the provided AV cable to the A V jack on the rear of the
monitor. Connect then the other end of the cable to the AV jacks (or Scart
connector) of the AV component labeled LINE OUT. See Fig 10.
Voice-activated function (Auto mode)
This voice-activated mode allows you to set the sensitivity of audio level that will
trigger the monitor. To use voice-activated function, follow these steps:
1. Set the sensitivity control on the monitor. See Fig.11.
2. Press the Auto button in the front of the monitor. This will turn off the screen
but the power LED will still be on.
3. When the sound from the camera reaches the set level, the screen will turn on
automatically. It will turn off again after 30 seconds.
Note: Under/In voice-activated mode, the monitor can only detect signal input
from one camera at a time. The channel button is not functional under
Voice-activated mode.
4