Know Your Product; Operation; Led Indicator - SPARKY BPR 18Li HD Instrucciones De Uso

Know your product

Before using the power tool, familiarize yourself with all
operating features and safety requirements.
Use the tool and accessories only for the applications
intended. All other applications are expressly ruled out.
1. Auxiliary handle
2. Rotary hammer journal
3. Locking sleeve
4. SDS plus socket
5. Depth gauge
6. Release button
7. Reversing switch
8. Ventilation slots
9. ON/OFF switch
10. Battery release button
11. Operation mode selector switch

12. LED indicator

13. LED work light
14. Plate for hanging
15. Adapter with chuck (not delivered with the machine)
16. Charger*
17. Battery pack*
18. Screw
* Accessories shown or described are not part of the
standard delivery scope.

Operation

This power tool is supplied with constant voltage only,
provided by a battery pack.
The rotary hammer is designed for hammer drilling in
concrete, stone, masonry and various brittle materials
and for drilling in steel, wood, plastics, etc.
PRIOR TO INITIAL OPERATION
▪ Always check the position of ON/OFF switch. The
battery pack shall be fitted and removed from the
machine only if the ON/OFF switch 9 is in OFF posi-
tion and the reversing switch 7 is in neutral (middle)
position.
▪ Make sure that the auxiliary handle is inserted cor-
rectly and securely fastened.
FITTING AND REMOVING THE BATTERY
PACK (Fig. 1)
To remove the battery: Press battery release button
(10) in direction (A) and pull it out of the machine body
(B).
WARNING: Always set the reversing switch
(7) in neutral (central) position prior to any work on the
machine e.g. fitting and removing a battery, changing
the bit, transport, maintenance and storage.
To insert the battery: Insert the charged battery into the
opening at the base of the power tool until the battery is
securely latched with a click (C). Ensure the battery pack
is securely fixed.
6
EN
pages-BPR 18Li HD.indd 6
LED INDICATOR
The battery charge level during operation can be
checked on the LED indicator (12).
The indicator display is on for approx. 5s when the trigger
switch (9) is pressed. In case battery capacity is below
20%, the display is on whenever the trigger switch 9 is
pressed.
Battery capacity: 60 - 100%
Battery capacity: 30 - 60%
Battery capacity: < 30%
Battery capacity: < 20%. The battery
must be recharged.
Blinking light
Problems with battery. The display is
activated upon pressing the trigger of
the switch. It may show one of the fol-
Blinking light
lowing battery states:
▪ Low battery ► Battery has to be
recharged;
▪ Temperature protection has been
actuated ► Battery must be cooled
down prior to resuming operation;
▪ Damaged or unrecognized battery
► Battery has to be replaced
LED WORK AREA LIGHT
The machine is equipped with LED light (13) to illuminate
the work area and improve visibility when drilling in areas
with insufficient light. To turn the LED light on press the
trigger of switch (9). LED light will automatically turn off 5
seconds after releasing the trigger of switch (9).
Electronic control may turn off the excessively overload-
ed machine in order to protect it. This mode is signalled
by blinking LED work area light (13). The power tool can
be used for its intended purpose after switching it on
again.
SWITCHING ON - SWITCHING OFF
Brief activation
Switching on: press ON/OFF switch 9 (Fig.2).
Switching off: release ON/OFF switch 9.
WARNING: At low temperature approximate-
ly or below 0 C (32 F) or in case the power tool has
о о
not been used for a long period (after storage in ware-
house/ shop / house), there might be no impact action
upon starting because of the thickened lubricant. In
this case, let the power tool run for 1.5 minutes at no
load in order to warm up, thus achieving improved lu-
brication and prolonged life of the power tool.
STEPLESS ELECTRONIC RPM CONTROL
Light pressure on ON/OFF trigger switch (9) results in
low rotation speed, further pressing the switch results in
smooth increase of the rpm to maximum upon reaching
the extreme position.
BPR 18Li HD
10.7.2017 . 9:56:29