Cleaning - Swiss Made Xpert/A Manual De Instrucciones

► The supplied oil is free of poisonous substances and will not cause irritations on either
skin or mucous membranes. After 21 days, it will have degraded to about 20% (CEL-
L-33-T-82).
• Oil the blades before, during and after every use.
• Oil the blades at the latest when the blades leave streaks or slow down.
• Apply several drops of oil on the front and on the sides of the clipping blades (see Fig. 11)
• Wipe excess oil off with a soft, dry cloth.
• Lubricating sprays do not contain enough oil for good lubrication, but are suitable for
cooling the clipping blades.
• Immediately replace damaged or notched blades in order to avoid injuries.

6.7 Cleaning

Housing of the clipper
Clean the housing of the clipper with a dry cloth.
‹
Shearing blade and shearing head
Use the brush supplied to clean the shearing blade and shearing head.
‹
Lubricate the clipping blades as described in chapter 6.6.
‹
Air filter
Fig. 12
Possible damage to the clipper!
Operating the clipper without the air filter can damage the clipper.
► Only use the clipper with a properly fitted air filter.
32
NOTE
Remove the air filter from the clipper.
‹
Clean the air filter with a dry brush or a
‹
nailbrush. Make sure no foreign objects get into
the device while cleaning it.
Slide the air filter back on the clipper.
‹
NOTICE
Sheep shearing machine Xpert