Fcc Information - RCA DTA800B1 Manual De Usario

FCC information

Equipment tested for
compliance as a
complete unit
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment o and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
di erent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
WARNING: Changes or modi cations to this unit not
expressly approved by the party responsible for
compliance could void the user's authority to operate
the equipment.
Ventilation
Y ou must adequately ventilate the product. M ake
sure there is adequate space around the unit to
provide proper air flow for ventilation. See diagram.
10 cm
7 cm
10 cm
10 cm
This converter box has earned the
ENERGY STA R.
2
RCA
RCA
DTA800B1
DTA800
7 cm
10 cm
This symbol indicates that this product
incorporates double insulation between
the hazardous mains voltage and user
accessible parts.
For your safety
The AC power plug is polarized (one
blade is wider than the other) and
only ts into AC power outlets one
way. If the plug won't go into the
outlet completely, turn the plug over
and try to insert it the other way. If it still won't
t, contact a quali ed electrician to change the
outlet, or use a di erent one. Do not attempt to
bypass this safety feature.
Removing the power plug is the only way to
completely remove power from your product.
Make sure the power plug remains easily
accessible.
For your records
Keep your sales receipt for proof of purchase to
obtain warranty parts and service.
In the event that service should be required, you
may need both the model number and the serial
number. In the space below, record the date and
place of purchase, and the serial number:
Date of Purchase :
Place of Purchase :
Serial No. :
Important battery
precautions
Any battery may present a risk of re, explosion,
or chemical burn if abused. Do not try to charge
a battery that is not intended to be recharged, do
not incinerate, and do not puncture.
• Non-rechargeable batteries, such as alkaline
batteries, may leak if left in your product for a
long period of time. Remove the batteries from
the product if you are not going to use it for a
month or more.
• If your product uses more than one battery, do
not mix types and make sure they are inserted
correctly. Mixing types or inserting incorrectly
may cause them to leak.
• Discard any leaky or deformed battery
immediately. They may cause skin burns or
other personal injury.
• Do not expose batteries to excessive heat (for
example, by leaving them in sunlight or close
to re).
• Please help to protect the environment by
recycling or disposing of batteries according to
federal, state, and local regulations.
DTA800B1_IB_EN_E_V3