Technical Data; Special Safety Instructions; Main Components - Max 45505 Manual De Instrucciones

HEAT GUN
Introduction
To get the most out of your new heat gun,
please read this manual and the safety
instructions before use.
Please keep the instructions in a safe place in
case you need to refer to them later.

Technical data

Voltage/frequency:
Power rating:
Step I:
Step II:
Incl. accessories

Special safety instructions

Do NOT use as a hair dryer or for any other
purpose.
1
14
220-240 V ~ 50/60 Hz
2000 W
350 °C, 300 l/min
600 °C, 500 l/min
3
Never point at people, animals, expensive,
fragile or in� ammable objects.
The nozzle becomes very hot during use.
Avoid touching it before it has cooled and
never place the gun near in� ammable
objects immediately after use.
Do not use near in� ammable liquids or
gasses or where there is poor ventilation.
If using the gun to remove paint containing
lead or other harmful substances, always
wear a protective mask.
Keep the nozzle and ventilation slots clear
of dust and paint residues to avoid danger
of � re.

Main components

1. Nozzle
2. Ventilation slots
3. On/off button
2