Audio Pro LV-SUB Manual Del Propietário página 13

hOw tO Change hOuse COde On the lv-suB
*
*
the house Code switch is located on the rear panel of the lv-suB.
set the same number (1, 2 or 3) as on the tX100 transmitter.
the house Code can be likened to a channel via which wireless signals are transmitted.
within the network, music can be sent simultaneously from 3 different audio sources.
hOw tO Change ZOnes FOr the lv-suB
*
the Zone switch is located on the rear panel of the lv-suB.
set the same letter (a, B or C) as the other loudspeakers you wish to have in the same zone.
a house Code (channel) can be divided up into a total of 3 zones. you can control the
volume level of these zones individually using the remote control. you can, for example, have
one volume level in the kitchen, another in the living room, and a third in the bedroom.
*
13