Checking The Number Of Times The Tape Was Used - Sony SVT-168 Manual De Instrucciones

Checking the Number of Times
the Tape Was Used
You can check how many times the tape has been used
in the GENERAL SET menu. The number of times
will be displayed on the display window. The number
of times is recorded on the beginning of the tape.
1
1
Turn on the power of the equipment to be used.
2
Press MENU and MENU V until "4" of the MAIN
MENU flashes on the monitor screen.
3
Press MENU B.
The GENERAL SET menu appears.
4
Press MENU V to move the flashing to the setting
of TAPE USED COUNT and set to ON by pressing
MENU + or –.
GENERAL SET
TAPE IN MODE STOP
TAPE END MODE REW
TAPE USED COUNT ON
CLOCK ADJUST 0 1 : 0 0
APC ON
THREAD CHECK OFF
ON: when the tape is inserted, the VCR
automatically rewinds the tape and the number
of times the tape was used will appear on the
display window. While the VCR is rewinding
the tape, "<T-USED COUNT>" flashes on the
monitor screen.
< >
T - U S E D C O U N T
OFF: the VCR starts recording from the point the
tape is at when it is inserted.
2-4 5
5
Press SEARCH to return to the normal display.
To return to the MAIN MENU screen from the
current menu
Press MENU again.
To go to the next menu from the current menu
Press MENU V until "NEXT PUSH B" flashes and
press MENU B.
Note
While recording of the TAPE USED COUNT is in progress,
the REC indicator lights in the display window.
25