Attach Detergent Siphon Hose To Pump; Add Engine Oil And Fuel - Troy-Bilt 020344-2 Manual Del Operario

.
Insert spray gun holder wireform (A) through hole on
left side of handle (viewing from front of unit). Hold
wireform in place and attach a plastic knob (B) from
inside of unit. Tighten by hand.
Add Engine Oil and Fuel
• Place pressure washer on a level surface.
• Refer to engine operator's manual and follow oil and
fuel recommendations and instructions.
6. Insert multi-colored spray tips and other supplied
accessories in spaces provided in accessory tray. See
How to Use Accessory Tray.
Attach Detergent Siphon Hose to Pump
Attach detergent siphon hose (C) to barbed hose fitting (D)
on pump.
NOTICE Any attempt to crank or start the engine before it
has been properly filled with the recommended oil will
result in equipment failure.
• Referto enginemanual f or oil andfuel fill information.
• Damage to equipment r esultingfrom failureto follow this
instructionwill voidwarranty.
NOTE:Checkoil often during engine break-in. Refer to
engine operator's manual for recommendations.
8 www.troybilt.com