Display; Getting Started; Installation; Initialisation - Topcom ALLURE 300 Manual De Usuario

Topcom Allure 300
5.2

Display

You received new messages in the telephone network mailbox.
XX You have received 'XX' new messages in your call list.
NEW
REP You have received the call more than once.
VIP You have selected the number as VIP and cannot be erased out of
the call list.
The battery is almost empty and needs to be replaced.
The alarm is enabled.
6

Getting started

6.1

Installation

Put batteries in the battery compartment to activate the display :
• Open the battery compartment at the bottom of the unit.
• Insert 3 AAA Alcaline batteries (1,5V).
• Close the battery compartment.
• Connect one end of the line cord to the telephone line wall
socket and the other end to the bottom of the phone.
• The connector 'DATA' can be used to connect a telephone in parallel or to connect an
analogue modem.
When the battery indicator
When the batteries are removed, you have 5 minutes to replace them.
After that time, the memory will be lost.
Never change batteries when the telephone line is connected !
6.2

Initialisation

6.2.1 Display language

After installing the batteries, the default display language is shown.
Press or to select the desired display language.
Press to go to the next setting 'Memory capacity'.
8
is shown, the batteries must be replaced.
+
-
-
+
USE 3 S 3 SIZE "AA "AAA" A"
BATTERIE RIES
Topcom Allure 300