Multi Mode; Multi Edit Mode - Akai Professional ADVANCE 61 Guia De Inicio Rapido

Multi Mode

Multi Mode lets you use your Advance 61 to control a multi in
VIP. A multi is collection of 2–8 patches (from 1 or more
plugins). Each patch is assigned to a channel, and each
channel has an assigned color. When using a multi, you can
simultaneously control volume, panning, solos, and mutes for
each channel in a mixer-style interface. You can do this only
when using VIP.
Multi Mode also contains the channel strips for the 4 buses and
the master channel. Each channel of a multi sends its audio to
the master channel and can also send it to each independent
bus.
• Press the Multi button to cycle between the pages for Level & Pan, Sends, and Inserts.
• Use the Page Left/Right buttons to move between each view of 4 channels, the bus Sends, and the
Master Channel.
• Use the Cursors to select a channel, bus, or insert slot.
• Press a switch to solo a channel.
• Press a pad to mute a channel.
• Turn an encoder to adjust the volume of a channel or the level of a bus send.
• Press Shift and turn an encoder to adjust the panning of a channel.
• Press the Data Dial to enter Multi Edit Mode.

Multi Edit Mode

Multi Edit Mode lets you edit the various settings of each
channel when using
transposition, MIDI channel, and mute or solo status).
• Use the Cursors to select the parameter you want to edit.
• Use the Data Dial to change a value or setting.
• Press the Multi Mode Button or Data Dial to exit Multi Edit
Mode and return to Multi Mode.
• To add a patch to a channel (or change a patch in a
channel):
1. Press Browser to enter Browser Mode.
2. Use the Cursors to move to the Channel tab at the top of the page (CH#). The number indicates the
currently selected channel of the multi.
3. Turn the Data Dial to select the desired slot (CH1–CH8) or Insert Slot (for channels 1–8, sends B1–
B4, and Master Channel) and then press the Data Dial.
4. Use the Data Dial and Cursors as you would in Browser Mode to select and load a patch. That
patch will then be loaded to the channel of the multi. Repeat Steps 2–4 to add more patches.
• You can still use the following Multi Mode controls while in Multi Edit Mode:
Press a switch to solo a channel.
o
Press a pad to mute a channel.
o
Turn an encoder to adjust the volume of a channel.
o
Press Shift and turn an encoder to adjust the panning of a channel.
o
Use the Page Left/Right buttons to move between each view of 4 channels (the original channel's
o
parameters will remain in the display, though).
Advance 61 (keyboard range,
13