Turning The Power On; Zone Control; Selecting A Source; Volume Adjustment - Clarion M606 Guia De Inicio Rapido

Turning the Power On

Start the engine. The power is supplied to this unit.
Press [
unit.

Zone Control

When powered up for the first time, you need choose the audio configuration type: rotate the [UP/
DOWN] knob to select "STANDARD", "MULTI ZONE" or "TOWER", and press [ENT] button to
confirm.
If "STANDARD" mode is selected, all the zones will be configured together. If "MULTI ZONE" is
selected, the zones can be configured separately. If "TOWER" is selected, the zones will be split
into zone 1 and zone 2 (tower).
* To reset the audio configuration type, please access system setup mode.
SRC ] button on the panel to turn on the
P-

Selecting a Source

Press the [ SRC ] button to change the operation mode.
P-

Volume Adjustment

STANDARD: Rotate the [VOLUME] knob on the front panel to adjust volume level.
The volume of all the zones will be adjusted together.
MULTI ZONE: In Volume adjustment mode, press the [
number, then rotate the [VOLUME] knob to adjust.
* Use [ENT] button and [UP/DOWN] knob to select whether link ZONE 2, 3, 4 to ZONE 1.
TOWER: In linked mode, rotate [VOLUME] knob on the front panel or press the [
button on the remote control. In non-linked while in volume adjustment press the [
button to select Zone 1 or Tower, then rotate the [VOLUME] knob to adjust.
* Use [ENT] button and [UP/DOWN] knob to select whether link ZONE 1 to TOWER.
] or [ ] button to select ZONE
] or [ ]
] or [ ]
M606
5