Face Plate - Omnitronic PM-322 Manual Del Usuario

(5) TREBLE CONTROL
Used to increase or lower the HIs of the input signal.
(6) MIDDLE CONTROL
Used to increase or lower the MIDs of the input signal.
(7) BASS CONTROL
Used to increase or lower the LOWs of the input signal.
(8) CHANNEL FADER
Used to adjust the input level of each channel.
(9) MASTER LEVEL DISPLAY
The display shows the level of the left and right master output.
(10) CROSSFADER
Mixes the signals of one channel with another. If the crossfader is in the center position, both channels
can be heard at the same volume.
(11) MASTER CONTROL
Adjusts the level of the master output.
(12) CUE LEVEL CONTROL
With the Cue Level control, you can adjust the phones volume without changing the output signal.
(13) CUE MIXING FADER
Selects the channel for monitoring. The monitor signal comes from Prefader. This means it will not be
affected by the channel faders.
Connect your headphones to the HEADPHONES jack. With the CUE MIXING fader you can select the
desired channel.
(14) CUE SPLIT/CUE MIX SWITCH
Cue Split function: the Cue signal is on the one side of the headphones and the output signal on the
other side.
Cue Mix function: the adjustable mix of Cue signal and output signal is on both sides of the headphones.

5.2 Face plate

(15) DJ MIC SOCKET
You can connect microphones with XLR plug or jack.
(16) HEADPHONES SOCKET
Use this socket to connect the headphones. Headphones from 8 ohms to 600 ohms can be used.
18/37 00039561.DOC, Version 1.2