3.3
Addition of
aroma essence
3.4
Switching the
unit on and off
3.5
Regulating
nebulizer settings
3.6
Illumination
When the unit is switched off, you can remove the nebulizer attachment
and use a cloth to remove any excess water.
Dispose of the leftover water after use and rinse out the tank with fresh
drinking water. Before using again, fill the tank with fresh drinking water.
When you have switched off the unit and do not intend to use it for an
extended period of time, remove and empty the water tank.
If you wish to use the unit with aroma essence supplied, add 5 drops of the
essence to the 500 ml filled water tank. Please note that a film may form
through adding the essence! You can obtain further aroma essences with other
fragrances through MEDISANA.
Fit the nebulizer attachment
Connect the mains adaptor lead to the socket
the mains outlet.
After a short press of the
water and the fan will start up. A further press of the
the unit off.
The unit's automatic cut-off feature ensures that the fan and nebulizer are
automatically switched off when the water reservoir is empty.
Operating time
Level 1 when filled with 500 ml of water: approx. 9 hours.
Level 2 when filled with 500 ml of water: approx. 6 hours.
The MEDISANA Intensive Humidifier Medibreeze PLUS can be operated at 2
different power settings. To switch from setting 1 to setting 2, press the
button
once. Due to the higher fan output, more moisture is released into
the surrounding air.
The water tank in the MEDISANA Intensive Humidifier Medibreeze PLUS
features an internal illumination unit that can be activated with a simple press
of the
button
. A further press of the button switches the illumination
off. Illumination can be used independently of the fan and nebulizer.
When the unit switches off automatically, the illumination remains on. The
intensity of the light decreases when the nebulizer is activated.
3 Operating
onto the unit.
and plug the adaptor into
button
, the unit will start to nebulize the
GB
button
switches
11