GETTING STARTED
Easy Install
If you use the STB for the first time, the "Easy Install" menu appears.
Press "LEFT" or "RIGHT" cursor button to setup the Region and OSD
Language.
Highlight "Search", press the "OK" button to start channel search.
Installation
1
Press the "MENU" button to enter main menu.
Press "LEFT"or "RIGHT" to select "Installation", press "OK" button to enter
2
the Installation menu.
3
Press "EXIT" button to exit.
Auto Scan
1
Press "UP" or "DOWN" to select the "Auto Scan", press "OK" button to enter
the Auto Scan menu.
2
Press the "LEFT" or "RIGHT" cursor button to select Scan mode, and highlight
"Search", then press the "OK" button to start auto scan .
Channel Scan
1
Press "UP" or "DOWN" to select "Channel Scan" and press the "OK"
button to enter the Channel Scan menu.
2
Press "LEFT" or "RIGHT" cursor button to select Scan mode, Scan Band
and Channel No. and highlight "Search", then press "OK" button to start
channel scan .
Power Control
Press "UP" or "DOWN" button to select the "Power Control", Press "OK"
1
and "Power Control" option is highlighted.
2
Press the "LEFT" or "RIGHT" button to select the desired setting. When
selected "On", the STB will provide 5V power to antenna. It will not
provide when selected " Off".
Channel Scan mode:
By channel
By frequency
4
English
Easy Install
Region
Spain
OSD Language
English
Search
Select
OK
Enter
EXIT
Exit
Installation
Auto Scan
Channel Scan
Power Control
Select
OK
Enter
EXIT
Exit
Auto Scan
TV Channel List
Radio Channel List
2 BBCi
1 BBC Radio Wales
2 BBC Radio Cymru
3 CBBC Channel
4 BBC 2W
5 BBC THREE
6 BBC ONE Wales
UHF: 470.0-862.0 MHz
Ch No:
Frequency: 490.00 Mhz Modulation:
EXIT
Exit
Channel Scan
Scan Mode
By Channel
UHF
Scan band
Ch No.
22(482.000MHz)
Frequency
482.000
Band Width
8 MHz
Network Search
Off
Search
Signal Intensity
Signal Quality
Select
OK
Enter
EXIT
Power Control
Tuner Power
Off
RF Loop-through
On
Change
Exit
EXIT
GI:
FFT:
24%
94%
97%
Exit