Assembly & Set-Up; Contentsof Carton - MTD 460 Serie Manual Del Operador

Assembly & Set-Up
3
Contentsof Carton
One Lawn Mower
One Grass Catcher
One Lawn Mower Operator's Manual
One Engine Operator's Manual
One Bottle of Oil
One Side Discharge Chute
Assembly
NOTE:This unit is shipped without gasoline or oil in the engine.
Fill up gasoline and oil as instructed in the accompanying engine
manual BEFORE operating your mower.
Handle
1.
Remove any packing material which may be between
upper and lower handles.
a. Pull up and back on upper handle as shown in Fig.
3-1. Make certain the lower handle is seated securely
into the handle mounting brackets. Do not crimp
cables while lifting the handle up.
2.
Insert a carriage bolt found in the manual bag into the
upper hole on the handle mounting bracket. Secure with
one plastic wing nut, also included in the manual bag.
Repeat on other side with remaining hardware. See Fig. 3-2.
Handle Hardware
Carria_olts (2)
Wing Nuts (2)
Figure 3=2
Figure 34
b. Tighten star knobs to secure upper handle to lower
handle. Make sure that each carriage bolt is seated
properly in the handle.