Chi-043 Client - Alcad CHI-043 Manual De Uso

CHI-043 CLIENT MODE
After the CHI-043 is configured in AP mode, the CHI-043 will have to be changed
to operate in client mode from the configuration menu in order to connect the room
terminal to the network. To make the change maintain the "MENÚ" button pressed
until hearing a long "beep". Afterwards, the "OK" button will need to be pressed
twice. The data that must be shown in the LCD screen is the ID (identifier) of the CHI-
043. When ID is shown, the right arrow will have to be pressed four times. Once
arriving in this position, the message shown will be: WIFI MODE AP. To change to
client mode, the procedure is:
ALCAD - 11