Chi-043 Configuration (Ap Mode) - Alcad CHI-043 Manual De Uso

CHI-043 CONFIGURATION (AP MODE)

The CHI is prepared to work in AP mode by default, therefore the method to
configure the device would be by using another wireless device such as a laptop
or a smartphone. A CHI-043 in AP mode can be detected by wireless devices as
each CHI-043 in AP mode has its own SSID. The naming scheme of the SSID is
CHI_XXXXXX where XXXXXX would be the 3 last elements of the device's MAC.
For example: If the CHI-043 has the MAC 00:1D:21:D3:77:C5 its SSID would be:
CHI_D377C5.
In order to connect to the CHI-043 to the network, the following AP password must
be entered:
Password: alcadnursecall
Once connected to the network of the access point, we can access to the web
configuration tool by the I.P. address of the device:
IP: 192.168.1.1
Once having accessed the configuration tool, different points can be configured.
ALCAD - 8