Anti-Theft Feature; Changing The Password - Jensen VM9022 Manual De Instrucciones

VM9022

ANTI-THEFT FEATURE

The VM9022 is equipped with an anti-theft feature requiring
the user to enter a password upon initial power on.
Enter Password:
1 2 3
4 5 6
8 9
7
0
Entering the Default Password
The default user password is 012345 (6 digits). Enter the
password using the on-screen keypad and then press the
Enter (arrow) button. You can also use the remote control
keypad to enter the password.
Press the joystick Enter button (18) on the remote control to
confirm.

Changing the Password

To change the anti-theft and RATINGS protection password,
perform the following steps:
1. Press the SETUP button (31) on the remote control or
touch the button on the screen to enter the
"SETUP" menu.
2. Touch RATING to view the "RATING" sub-menu. An
open lock icon to the right of the "Password" field
indicates that a user password had not yet been
entered.
3. Touch the keypad icon next to the blue box in the
"Password" field to open the on-screen keypad.
SETUP
RADIO
General Language Audio Speaker
RDS
Password
Rating
Rating 8. Adult
DivX
Load Factory Reset
Hardware
P.VOL
TS Cal
4. Enter a new 6-digit password and press the Enter
(arrow) button.
The "lock" icon will now appear closed and the new anti-
theft password will be set, as well as the password for
RATING protection (see "Rating Sub-menu Features"
on page 18).
NOTE: If you forget your password, contact Customer
Service at 1-800-323-4815 for assistance.
7
02:40
AM
Bluetooth Back
1 2 3
4 5 6
7 8 9
0
Clear