Operation - Snapper XD SXDUC82 Manual Del Propietário

OPERATION

W A R N I N G
You are responsible for controlling and steering the utility cart once it is moving. Grasp the handle securely before moving.
Make sure you are ready to move with the utility cart before pressing the on-off button and lock-out button. Keep a firm grip
on the handle once you are moving.
LOADING YOUR UTILITY CART
Load your utility cart carefully; disperse the load evenly across the bucket. The bucket can take up to 220 pounds (100
kilograms). When moving up and down hills, limit your load to no more than 220 pounds (100 kilograms). If you think you
are carrying too much, remove some material from your utility cart.
INSTALL BATTERY PACK (See Figure 3)
• Open the battery cover.
• Align the raised rib inside the panel with the groove on the battery pack.
• Ensure the battery pack is secured in place in the battery compartment.
• Insert the battery key.
• Close the battery cover.
REMOVE BATTERY PACK (See Figure 3)
• Press the power switch to "OFF" position to stop the product.
• Open the battery door to access the battery compartment.
• Remove the battery key.
• Depress the latch on the back of the battery pack to release the battery.
• Remove the battery pack.
W A R N I N G
When placing battery pack in the tool, be sure raised rib on battery pack aligns with the groove inside the tool and latches
into place properly. Improper installation of the battery pack can cause damage to internal components.
Battery key
9
Fig. 3