Lifting Bracket; Generator Anchor - Westinghouse PRO Serie Manual Del Propietário

LIFTING BRACKET

1. Before lifting the generator, inspect the bracket and
make sure it is securely fastened to the generator.
Do not lift the generator unless the lifting bracket is
securely fastened.
2. Hook a chain or strap through the eye on the lifting
bracket and make sure it is securely fastened.
3. Connect a suitable lifting device to the chain or
strap.
4. Lift the generator slightly to ensure it is lifting
straight and level. Adjust the bracket if required to
allow it to lift correctly.
Figure 20 – Lifting Bracket
OPERATION

GENERATOR ANCHOR

The generator should be used on a flat, level surface
whenever possible. If the particular job site requires the
generator to be used on uneven terrain, the generator
should be anchored. Insert a stake or piece of rebar
through the anchor bracket on the frame (see Figure
21). Drive the stake into the ground to secure the
generator and prevent it from moving. The anchor is
standard on 10KPRO and optional on 8KPRO.
WARNING
Anchoring the generator to the
ground does not electrically ground
the generator. For proper electrical
grounding of the generator, see
Grounding the Generator on page 24.
Figure 21 – Anchor Bracket
27