Technical Specifications - Eschenbach 16033 Manual De Instrucciones

5. Scure the light tube into the top of the
lamp.
Operating Instructions
X Pay attention to the safety instructions given previsouly when setting up
the lamp at the desired location.
Plug the power cable plug into a properly wired household wall outlet
X
providing AC230~.
Use the switch to switch the lamp on and off.
X
Adjust the lampshade to the desired position.
X
WARNING! Allow the lampshade to cool down
if the lamp has been in use for some time.
Never use excessive force when adjusting the
X
lampshade.
Replacing the Tube
After the lamp has been disconnected from the power
X
source, you may replace a defective light tube with one that
has the same specifications. Never use excessive force
when replacing the light tube! WARNING! First let the light
tube cool down before handling it. RISK OF INJURY!
Troubleshooting
1. If the lamp does not turn on:
a) Make sure the power cable plug is securely plugged into the wall outlet.
b) Make sure the light tube is securely locked into the light tube interface
socket.
c) The light tube could be defective. Pay attention to the instructions
given previously when replacing the light tube.
2. If the lamp still does not turn on after you have performed the above
steps, get in touch with the authorized service personnel.

Technical Specifications

Article no:
Power consumption:
16033 Operating voltage:
24W Tube colour temperature:
- 8 -
230V~/50Hz
4500K