Dometic FreshJet Serie Instrucciones De Montaje página 45

Dometic FreshJet
Connecting the circuit board
➤ Insert the 12-pin plug (8) in the socket (7) on the circuit board of the air
outlet unit.
See fig. c
➤ Choose the suitable seal in accordance with the following table:
Roof thickness
30 – 45 mm
45 – 60 mm
➤ Position the seal on the mounting frame.
➤ Fasten the mounting frame (3) on the underside of the roof air conditioner
with the 4 screws supplied.
See fig. d
A
NOTICE! Risk of damage
Tighten to the specified torque.
➤ Tighten the screws using a torque spanner and a fastening torque of
2.5 Nm.
8.8 Installing the air outlet unit Design ADB
See fig. e
➤ Install the air filter in the specified sequence.
See fig. f
➤ Attach the air outlet unit magnetically to the mounting frame.
EN
Seal type
thin (2)
thick (1)
Installation
41