Operation Of The Pre-Recorded Message Player - EGi MILLENIUM 1202 Manual Del Usuario

Control console. Operation of the pre-recorded message player
1 Broadcasting a message at a definite time
If three groups -for instance- have been previously
created:
SETUP
Provided that the general access password is
NOT active, and there is a pre-recorded message
player (1103) in the system but NOT a module for
sending messages over the telephone (1104):
MESSAGE MSG. 1
TIME yES
hOUR + or – changes the hour.
MINUTE + or – changes the minute.
programs message number one to be
launched at the selected time.
2 Broadcasting a message as a reaction to an event
If three groups -for instance- have been previously
created:
SETUP
Provided that the general access password is
NOT active, and there is a pre-recorded message
player (1103) in the system but NOT a module for
sending messages over the telephone (1104):
MESSAGE MSG. 2
EVENT
– – – – – –; EVENT 1; EVENT 2 or
EVENT 3 (and then the sign ">" appears next
to the selected option).
Assigns message number 2 to no event, or
to event 1, 2 or 3 (depending on the previously
pressed key).
1202
If the general access password is active the system will require us to introduce it every
time we try to operate this module (see point 2 of "Access restrictions").
3 Selecting the destination of a message
If three groups -for instance- have been previously
created:
SETUP
Provided that the general access password is
NOT active, and there is a pre-recorded message
player (1103) in the system but NOT a module for
sending messages over the telephone (1104):
MESSAGE MSG. 3
ZONES +
assigns ZON 001 as first destination of
message number 3, and leaves empty the three
other possible destinations. In order to assign a
2nd, 3rd or 4th destination, move vertically the
symbol ">" with the 4 buttons on the right and
select destination between the different zones and
+ or – When everything is
groups by pressing
according to our preferences, we must press
4 Respecting or overriding the "private" mode of
the zones
If three groups -for instance- have been previously
created:
SETUP
Provided that the general access password is
NOT active, and there is a pre-recorded message
player (1103) in the system but NOT a module for
sending messages over the telephone (1104):
MESSAGE MSG. 4
PRIVATE
yES (and then the sign ">" appears next
to yES) +
ensures the broadcast of the
message in ALL the destination zones.
NO (and then the sign ">" appears next to NO)
+ will only broadcast the message in those
destination zones which are not in "private" mode.
.
35.