Specifications - Sony CSP-5000E Manual De Instrucciones

Specifications

Technical Information
Video signal system
PAL/CCIR standard
Inputs VIDEO INPUT connectors
(BNC) (128)
1Vp-p/75 ohms composite video
Outputs VIDEO OUTPUT connectors
(BNC) (32)
1Vp-p/75 ohms composite video
Reference input/output
SYNC IN connector (BNC)
1Vp-p/75 ohms composite video
SYNC OUT connector (BNC)
0.3Vp-p/75 ohms composite sync
Keyboard interface
KBD I/F connector (RJ-45, 8-pin)
RS-422A (7)
RCV I/F connector (RJ-45, 8-pin)
RS-422A/485 (No.8 only)
External timing inputs
EXT TIMING connector (1)
32 inputs, MAKE contact
Alarm inputs ALARM IN connectors (8)
256 inputs, MAKE contact
Alarm outputs ALARM OUT connector (1)
32 outputs, open collector 16V
100mA max.
Sequence steps 128 steps per monitor
Switching dwell time
1 to 30 seconds, external trigger
Tour sequence 8
Time event 8 steps per day
Event program 8 types (day of week, calendar
date)
Alarm activation Available for up to 4 monitors
1 to 240 seconds, ∞
Alarm duration
Camara IDs Up to 12 alphabetical characters
Timer accuracy ±30 seconds/month (under normal
temperature)
Power requirements
220 to 240V AC, 50Hz
Power consumption
Less than 300W (fully configured)
Operating temperature
0˚C to 40˚C
Storage temperature
–20˚C to +60˚C
Dimensions 424 x 354 x 495 mm (w/h/d)
(excluding projecting parts)
Mass Approx. 32.5 kg (fully configured)
16(EN)
Supplied accessories
Rack mounting brackets (for EIA-
standard racks) (attached) (2)
AC power cord (1)
Lithium battery CR2032 (2)
Operating Instructions
Design and specifications are subject to change
without notice.