Cleaning And Storage - JOCCA 6159 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
12-EN
-This appliance should not be used with children, people with heart
problems, pacemakers, thrombosis, or serious body injuries; in short,
anybody suffering any serious health problems, please check with your
doctor.
-Remember that this product has been designed to provide relaxation,
and not to cure.
-Before connecting the appliance to the mains, check that the cable and
plug are in perfect conditions. Also check that the voltage indicated on
the appliance is valid for your electrical installation.
-Always use the AC/DC adaptor with the appliance; never try to use
it with another one even though it might seem to have the same
characteristics.
-If you detect that the power supply cable, the plug or the adaptor are
damaged or have fallen into water or any other liquid, donot use the
appliance, replace the cable, the plug, or the adaptor. Go directly to the
authorised JOCCA technical service where they will replace it correctly
for you.
-Do not immerse the appliance or any part of it in water or anyother
liquid.
-Completely unroll the power cable to avoid over heating.
-If for any reason, the heat supplied by the appliance is too much,
remove the pillow from your body immediately.
-Do not pull the cable to unplug the appliance from the mains, always
pull from the plug.
-For your safety and for the appliance to work correctly, alway suse
JOCCA spare parts and accessories.
-Unplug the appliance from the mains when you have finis hedusing it,
before cleaning it and if it does not work correctly.
INSTRUCTIONS FOR USE
-Connect the AC/DC adaptor provided to the massaging pillow
adaptor connector.
-Connect the other end of the adaptor to the power supply.
-Check that once connected, the appliance is in perfect condition.
-Place the massaging pillow on your back and attach it to your
body with the rucksack-type fixing straps.
-You can use it either at home or in your car thanks to the two
adaptors provided, one for a home power supply and the other
one for a car.
-Take the remote control and press the O/I button. The pillow will
be activated automatically.
-If you only require the heat option, just press the button. To
disconnect this option, simply press that same button again .
-If, on the other hand, you wish to enjoy the massage and
heat,then, once having pressed O/I, press
-The pillow has various massaging programmes and massage
intensity, that can be selected by using the remote control.
-BY pressing the SET button repeatedly, the massaging system will
change up to 8 times.Once you have chosen the desired massage,
the intensity of thesame may be increased up to 4 times if you
press the button
.
-To disconnect the massage option, just press the O/I button.
-The appliance will not be fully off until it is disconnected from the
power supply.
-The device has a security system that switches off it in 15 minutes
of continuous operation

CLEANING AND STORAGE

-Before cleaning the appliance, make sure it has been disconnected
from the mains.
-Leave the appliance to cool down before cleaning it.
-Never place this appliance in water or in any other liquid.
-Clean the pillow with a damp cloth.
-Keep the dryer in a dry place once this gets cool.
EN-13
also.

Publicidad

Tabla de contenido
loading

Tabla de contenido