Playback Features; Starting Disc Playback; Basic Playback Controls - Panasonic DVD-S58 Instrucciones De Funcionamiento

Ocultar thumbs Ver también para DVD-S58:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Playback Features

Starting disc playback

Turn on the TV and select the correct
1
video input.
Press POWER ^/l to turn on the DVD
2
player.
Press OPEN/CLOSE ; to open the disc
3
tray.
Place a disc into the disc tray with the
4
label facing up, then press OPEN/CLOSE
; to close the disc tray.
For double-sided discs, load the side
which you want to play facing up.
Playback may start automatically.
5
If not, press PLAY/PAUSE q/h.
If a disc menu appears on the TV, see
next page > Using the disc menu.
If the child lock was activated for the
inserted disc, you have to enter your four-
digit password (see DVD Menu options >
Password). (
page 28)
See the next few pages for other
playback features under ' Playback
features '.
Tips:
Do not overturn the DVD player while
disc loading, playing or ejecting.
Do not close the disc tray manually
even if the power switched off.
Tips: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
18
18

Basic playback controls

Unless otherwise stated, all operations
described are based on remote control use.
Pausing playback
During playback, press PLAY/PAUSE q/h
1
to pause playback and display a still picture.
Sound will be muted.
To resume normal playback, press PLAY/
2
PAUSE q/h again.
Skipping title/chapter/track
To select sequentially
Press SKIP u / i to go to the
previous or next title/chapter/track.
To select directly (chapter/track only)
Use the numeric keypad (0-9) to enter
valid chapter/track number.
e.g., 5: 5
15: > = 10
Stopping playback
Press STOP g.
The stopped position is memorized.
Resume play function
Press PLAY/PAUSE q/h to restart from
this position.
The position is cleared if the tray is
opened or you press STOP g several
times to display 'g' on TV's display.
Tips:
Screen saver will start automatically if
the disc playback is stopped for about
5 minutes.
The player will automatically switch
to Power Standby mode if you do not
press any buttons for about 25 minutes
after the disc has stopped playing.
1
5

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Dvd-s38

Tabla de contenido