Use Hdmi Cec Protocol - Panasonic DVD-S58 Instrucciones De Funcionamiento

Use HDMI CEC protocol

(DVD-S58 only)
The DVD player supports HDMI CEC
(Consumer Electronics Control) protocol.
Panasonic does not guarantee 100%
interoperability with all HDMI CEC
devices.
Turn on the HDMI CEC operations on the
1
TV and other connected devices. See
TVs/devices manual for details.
You can now enjoy the following HDMI
2
CEC controls.
One Touch Play
When you press POWER ^, it turns on
the TV and this DVD player, then disc
play starts.
–
To enable One-touch play, a video
disc must be placed in the disc
compartment before operation.
System Standby
When you turn off the TV, all connected
HDMI CEC devices switch to standby
mode simultaneously.
Control with TV's remote control
Playback Control
You can play discs.
Disc Menu Control
By displaying the disc menu, you can
play discs using the disc menu.
Device Select
When you select this unit as an input
source, this unit turns on automatically.
Tips:
–
The default setting for HDMI CEC
features is on. You can change the
default setting, see DVD Menu options
> {HDMI CEC}. (
Tips: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
page 25)
Playback Features
23
23