Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
VM9311TS
TUNER OPERATION
Tuner TFT Display
17
6
4
1
10
2
P1
PRESETS
11
12
13
14
Source:
7
8
1.
Current Radio Band Indicator
2.
Radio Frequency Indicator
3.
Clock
4.
Stereo Broadcasting Indicator
5.
Strong Local Signal Broadcasting Indicator
6.
Preset Radio Stations: Touch to recall preset stations or
touch and hold to store a station
7.
Playing Mode
8.
User Defined Equalizer Level
9.
Loud Setting Indicator
10. Current Preset Station Indicator
11. |<<: Touch to seek backward
12. >>|: Touch to seek forward
13. <<: Touch to tune backward one step
14. >>: Touch to tune forward one step
15. BAND: Touch to change between AM/FM bands
16. AS: Touch to automatically store stations
17. Touch this area to return to the MAIN MENU
Switch to Radio Tuner source
Press the SRC button (15) on the front panel or remote
control (8) to switch to the TUNER source.
Select FM/AM Band
Touch the BAND button (15) on the screen, or press the
BAND button on the unit (14) or remote control (20) to
change between the following bands: FM1, FM2, FM3, AM1,
and AM2.
Seek Tuning
5
3
Press the >>| button (19) on remote control or the > button on
the joystick (17) to seek the next station higher.
Press the |<< button (17) on the remote control or the <
button on the joystick (16) to seek the next station lower.
Manual Tuning
Press the /\ or V buttons (18, 19) on the joystick to increase
or decrease the tuning frequency one step.
Using Preset Stations
Six numbered preset buttons store and recall stations for
15
16
each band. All six stored stations (P1-P6) for the current
band appear on the screen.
BAND
AS
Storing a Station
1.
Select a band (if needed), then select a station.
2.
Touch and hold an on-screen preset button (6) for three
9
seconds. The preset number appears at the top of the
screen.
Recalling a Station
1.
Select a band (if needed).
2.
Touch an on-screen preset button (6) to select the
corresponding stored station.
NOTE: You can also use the numered buttons on
the control panel to store and recall preset
stations.
Auto Store (AS)/Preview Scan
Automatic Storing of Preset Stations
To select six strong stations and store them in the current
band:
1.
Select a band (if needed).
2.
Press the AS button (26) on the control panel or touch
AS (16) on screen for 2 seconds to activate the Auto
Store function.
The new stations replace stations already stored in that band.
Preview Scan
Scan the AM or FM band for a preview of available stations in
your particular area. Press the play/pause button on the
remote control once (short press) or push in on the joystick
once (short press). Press again to stop preview scan.
Local Radio Station Seeking (LOC)
When the Local function is on, only radio stations with a
strong radio signal are played. To activate the Local function
in AM/FM tuner mode, press and hold the VOL/LO/DX knob
(6) on the front panel while the yellow volume bar IS NOT
visible. Press VOL/LO/DX again to turn Local off. When the
Local function is active, "LOC" appears on the screen and a
green indicator is illuminated.
15
Publicidad
Tabla de contenido
Solución de problemas
