Using the alarm
You can set two different alarm times. Before setting the alarm,
make sure to set the clock (Z page 7, "Setting the clock").
Setting the alarm
1
Press and hold [ALARM 1] or [ALARM 2] until the hour
display blinks.
2
Within 10 seconds, press [2/–, ADJ] or [+/6, ADJ]
to set the hour.
3
Press [ALARM 1] or [ALARM 2] to confi rm.
4
Repeat steps 2 and 3 to set the minutes.
5
Press [2/–, ADJ] or [+/6, ADJ] to select the days
of the week:
MON-SUN (everyday) ] MON-FRI (weekdays)
SAT-SUN (weekend)
SAT-SUN (weekend)
6
Press [ALARM 1] or [ALARM 2] to confi rm.
7
Press [2/–, ADJ] or [+/6, ADJ] to select the desired
alarm mode: "IPOD", "RADIO" or "BUZZER".
8
Press [ALARM 1] or [ALARM 2] to confi rm.
"IPOD" selection: Continue with steps 9 and 10.
"RADIO" selection: Continue from steps 11 to 16.
Setting iPod alarm
9
Press [2/–, ADJ] or [+/6, ADJ] to adjust the
volume level.
10
Press [ALARM 1] or [ALARM 2] to confi rm the setting.
Note:
• The buzzer will sound if no iPod or iPhone is detected at the
set alarm time.
• Music will be played from the iPod or iPhone's library when
10
10
the alarm sounds.
10
Setting radio alarm
11
Press [2/–, ADJ] or [+/6, ADJ] to adjust the
volume level.
12
Press [ALARM 1] or [ALARM 2] to confi rm.
13
Press [2/–, ADJ] or [+/6, ADJ] to select "FM"
or "AM".
14
Press [ALARM 1] or [ALARM 2] to confi rm.
15
Press [2/–, ADJ] or [+/6, ADJ] to select the
desired preset channel.
16
Press [ALARM 1] or [ALARM 2] to confi rm the setting.
Note:
• Alarm will function only when powered by AC power.
• To activate or display the alarm setting, press [ALARM 1] or
[ALARM 2] once.
• Press [ALARM 1] or [ALARM 2] again to deactivate the alarm
function.
Turning off the alarm
Press [ALARM OFF] to turn off the alarm.
The alarm will sound at the same time on the next day.
Note:
If the alarm is not turned off, it will sound continuously for
59 minutes before turning off by itself.
Snoozing the alarm
Press [SNOOZE] when the alarm sounds to stop it for a few
minutes.
The alarm will sound again after 9 minutes.
Tip:
For iPod touch and iPhone users, use the Memory Loader
application to unlock custom alarm settings (Z page 11,
"Using the Memory Loader application").