MIRKA MIRO 955 Instrucciones De Manejo página 11

The Brush Bristles on the edge of the Sanding Plate Cover:
The brush bristles on the edge of the Sanding Plate Cover serve two purposes, they keep the
sanding disc properly aligned with the work surface with out gouging and they also help the
efficiency of the dust collection by the vacuum cleaner. These brush bristles will wear with
continued use.
The Sanding Plate Cover should be replaced when the bristles are too worn to ensure effective
dust collection and stabilization of the sanding head. To replace, bring the unit to an authorized
service center.
NOTE: Only use sandpaper discs which fit properly and which are designed for vacuum use.
* install the vacuum cleaner hose:
1.
Unplug the machine.
2.
Plug the vacuum cleaner hose bayonet mount into the swivel mount in the back of the
machine. Once the tangs of the bayonet mount are fully inserted in the slots, hold the swivel
mount from turning and turn the hose bayonet mount clockwise to lock.
3.
Removal is the opposite of assembly.
7
11