Carrier Features - Greenlee 881-MBT Manual De Instrucciones

Carrier Features

The carrier assembly will hold the bender in the
upright position, allow for the bender to pivot into a
horizontal position, and slide into the bending or
transport position.
Note: All illustrations in this manual show the carrier
assembly in the bending position.
1. To slide the carrier assembly into the transport
position:
• Make sure the casters are in the locked position
so the table does not move.
• Loosen the screws (one on each side) on the
carrier assembly and pull snug toward the parts
tray.
2. To pivot the bender connecting bars to horizontal
position:
• Make sure the casters are in the locked position
so the table does not move.
• Use the ram positioner to lower the ram as low as
possible. Refer to "Adjusting Ram Position."
• Make sure the pump and hose are out of the
connecting bar pivot path.
• Disengage the lock plungers and flip the locking
arms upward while maintaining control of the
bender connecting bars.
Ram
Caster
Figure 10
Greenlee Tools, Inc.
Hose
Pump
Lock Plunger
Locking Arm
881-MBT Mobile Bending Table
• Carefully pivot the connecting bars into the
horizontal position.
Note: Do not use the fitting on the ram as a handle.
Do not use the fitting on the ram to rest the weight
of the ram on the vise assembly.
3. To reposition the connecting bars to the vertical
position:
• Make sure the casters are in the locked position
so the table does not move.
• Loosen the screws (one on each side) on the
carrier assembly and pull snug against the rail
support (as shown below).
• Tighten both screws on the carrier assembly once
it is up aginst the rail support.
• Make sure the ram positioner is used to position
the ram as close as possible to the pivot point.
• Make sure the pump and hose are out of the
connecting bar pivot path.
• Make sure locking arms are in the up/open
position.
• Carefully pivot the connecting bar assembly into
the vertical position and lock in place.
Connecting
Bars
Roller
Carrier
Assembly
Parts Tray
7
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070