Important Safety Information - Greenlee HFC30 Manual De Instrucciones

IMPORTANT SAFETY INFORMATION

This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury or
property damage. The signal word, defined below,
indicates the severity of the hazard. The message
after the signal word provides information for
preventing or avoiding the hazard.
Immediate hazards which, if not avoided, WILL result
in severe injury or death.
Hazards which, if not avoided, COULD result in
severe injury or death.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Read and understand all of the
instructions and safety information
in this manual before operating or
servicing this tool.
Failure to observe this warning will
result in severe injury or death.
Greenlee / A Textron Company
SAFETY
ALERT
SYMBOL
HFC30 Flow Control Valve
Skin injection hazard:
• Do not use fingers or hands to
check for leaks.
• Do not hold hose or couplers while
operating the power source.
• Depressurize the hydraulic system
before servicing.
Oil under pressure easily punctures
skin causing serious injury, gangrene
or death. If you are injured by
escaping oil, seek medical attention
immediately.
Wear eye protection when using this
tool.
Failure to wear eye protection can
result in serious eye injury from flying
debris or hydraulic oil.
Do not disconnect tool, hoses or fittings while the
power unit is running or if the hydraulic fluid is hot.
Hot hydraulic fluid can cause serious burns.
3
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070