Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECTING THE RECEIVER TO THE ZERO EMISSION CAMERA
1. Hold down the On/Off button (1) on the receiver. The power/battery charging light turns green. The light
will flash if the battery is low. Connect the receiver to the mains adaptor provided.
To turn off the device, hold down the On/Off button (1).
2. The following screen is displayed. Slide the
«unlock» icon to unlock the screen.
4. In Settings
, select a Wi-Fi network (home
or other).
If you use the Zero Emission Camera Wi-Fi key
(A014618) on your Zero Emission Camera,
select the Wi-Fi network «Babymoov-cam»
and enter the default password «12345678».
We recommend you write down the camera's identification number on the instructions. This is because,
over time, the number may fade and become illegible.
NB: By default, display is in English. Choose another language in the Settings.
You can use a micro SD card (FAT32) to increase your receiver's storage capacity.
You can also adjust other settings such as brightness, display, etc.
For more information on application operation, please see the Zero Emission Camera instructions.
14
ZERO EMISSION CAMERA RECEIVER • Instructions for use
3. The following screen is displayed.
You must connect to a Wi-Fi network to start
the application.
5. Once the receiver has been connected to your
router's Wi-Fi network and your Zero Emission
Camera has been plugged in (see Zero
Emission Camera instructions), you can select
the
icon to start the Babymoov application.
When connecting to a Zero Emission Camera
for the first time, once you have started the
application, you will be asked to enter the
identification number located on the bottom
of the Zero Emission Camera.
Publicidad
