Remote Control Batteries; Troubleshooting - Philips HTS3541/55 Manual De Instrucciones

Subwoofer
•
Output power: 50 W RMS (30% THD)
•
Impedance: 4 ohm
•
Speaker drivers: 133 mm (5.25") woofer
•
Dimensions (W x H x D): 160 x 265 x
265 mm
•
Weight: 2.50 kg
Speakers
Centre speaker:
•
Output power: 50 W RMS (30% THD)
•
Speaker impedance: 4 ohm
•
Speaker drivers: 1 x 63.5 mm (2.5") woofer
•
Dimensions (W x H x D): 159 x 84.5 x
80 mm
•
Weight: 0.35 kg
Front/Rear speaker:
•
Output power: 4 x 50 W RMS (30% THD)
•
Speaker impedance: 4 ohm
•
Speaker drivers: 1 x 63.5 mm (2.5") woofer
•
Dimensions (WxHxD): 84.5 x 159 x 80 mm
•
Weight: 0.35 kg/each

Remote control batteries

•
2 x AAA-R03-1.5 V
Laser
•
Laser Type (Diode): InGaN/AlGaN (BD),
AlGaInP (DVD/CD)
•
Wave length: 405 +7 nm/-7 nm (BD), 655
+10 nm/-10 nm (DVD), 790 +10 nm/-20 nm
(CD)
•
Output power (Max. ratings): 20 mW (BD),
6 mW (DVD), 7 mW (CD)
22
8

Troubleshooting

Warning
•
Risk of electric shock. Never remove the casing
of the product.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check
the following points before you request service. If
you are still having problems, get support at www.
philips.com/support.
Main unit
The buttons on the home theatre do not work.
•
Disconnect the home theatre from the power
supply for a few minutes, then reconnect.
Picture
No picture.
•
Make sure that the TV is switched to the
correct source for the home theatre.
No picture on a TV connected through HDMI.
•
Make sure that the HDMI cable is not faulty. If
it is faulty, replace it with a new cable.
• ( Home ) and then 731 on the remote
Press
control to restore the default picture resolution.
•
Change the HDMI video setting, or wait for
10 seconds for auto recovery (see 'Picture
and video settings' on page 16 ) .
Disc does not play high-defi nition video.
•
Make sure that the disc contains high-
defi nition video.
•
Make sure that the TV supports high-
defi nition video.
•
Use an HDMI cable to connect to the TV.
EN