Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Oc>erat na vo(JrFrench Do r Refraerat
[
k_J
j
k_J
USING THE CONTROL PANEL & DISPLAY
-2_F is Recommended
38°F is Recommended
Ice
off Button
Press the Ice Off button (_)
if you don't want to make more ice. The icon (_)
lights up and the Ice-Maker
stops making ice.
Cooling
Off (Hold
3 sec)
38°F is Recommended
e (Hold 3 sec)
®
/k
CAUTION
if the following occurs, turn off the ice maker.
- There is enough ice in the ice bucket.
- You want to save on water and energy.
- Water is not being supplied
to refrigerator.
If the ice maker function
is ON, and the water line is not connected,
you will hear a water valve
noise from the back of the unit. Press the Ice Off button until the ice Off indicator
('o_t, ) illuminates.
If you want to fill the ice cube bucket to maximum
capacity after installation,
follow these steps:
1. After the refrigerator turns on for the first time, check the display to see whether the Ice Off light
is ON or OFR If the Ice Off light is ON, press the Ice Off button.
2. Allow your refrigerator
to operate and cool down for 24 hours (or 1 full day). Waiting 24hours
will
allow your ice maker to cool properly.
3. After 24 hours or one full day, press the Ice Off button again.
CAUTION
o
o
o
o
If ice doesn't
come out, press the test button located on the right side of ice maker.
Do not press the test button continuously
when the tray is filled
with ice or water. Water may overflow
or the ice may become
jammed.
Use only the ice maker provided with the refrigerator.
The water supply to this refrigerator
must be installed/connected
by a suitably qualified
person and connected
to a potable water
supply only.
To operate the ice maker properly, water pressure of 20-125psi
is
required.
Do not try to disassemble
the ice maker.
Test button
Publicidad
Tabla de contenido
