Removing Film - Nikon SUPER COOLSCAN 9000 ED Manual Del Usuario

2
Insert fi lm
Place fi lm base up (
guides with the left end of the fi lm at
the fi lm line. If a masking sheet is used,
the start of the fi rst exposure should
be aligned with the inner edge of the
masking sheet.
can be placed in the holder as space
permits; place the fi lm end-to-end, with
no gaps.
Inserting Film
Use only one type of fi lm; do not place
negatives in the holder with positive
fi lm.
Be sure to align the end of the fi lm with
the fi lm line on the holder. A gap at the
leading edge of the fi lm could interfere
with accurate color reproduction.
3
Snap the holder closed

Removing Film

Tilt the holder to slide the fi lm over the de-
pressions at the front of the holder and pick
the fi lm up by its edges.
26) between the
Additional fi lm strips
Arrow
Direction
of insertion
Depressions
Guides
First frame
Masking sheet
Film line
Thumbnails
displayed in
order shown
55