babymoov Babyphone Premium Care Instrucciones De Uso página 18

This process is to match the parent unit with baby unit so that they can communicate with each other while no
other devices (even baby monitor of identical model) can interfere with you or receiving your signal. The baby and
parent unit are already paired when they are shipped from factory. However, we recommend to perform pairing
process again in case interference is experienced or when extra BU is added to work with the PU.
1. Press and hold the talk button (35) of PU.
2. Long press the power ON/OFF button (18) and wait until a starts flashing green.
Release both buttons (18) and (35).
3. Long press the ON/OFF button (1) for 3 sec to switch on the BU. Now touch and hold icon
wait until a show steady green while the BU number icon (15) 1 or 2 starts flashing green. Release the finger
touching icon (15)
4. Use the touch keys (2) (3)
or otherwise the system will not operate normally. Short press the button (1) to confirm your setting, the BU
number now show steady while starts flashing.
18
. Perform same to the other BU that can be purchased optionally.
to set the BU number to either (1) or (2). DO NOT set both BU to same number
BABYPHONE PREMIUM CARE • Instruction manual
PAIRING
for 5 sec and