Before Using The Appliance The First Time; Inserting And Removing The Mixing Bowl; Safety Switch; Using The Chopping Blade - Unold 78501 Instrucciones De Uso

beFore using the appliance the First time

1. Remove all packaging
transport safety devices.
2. Clean all removable parts as described in
the chapter on cleaning and care.

inserting anD remoVing the mixing bowl

1. Place the mixing bowl on the appliance
base. Make sure that the handle of the
mixing bowl is positioned somewhat toward
the back and then turn the bowl by the
handle clockwise corresponding to the
arrow mark in the direction of "Closed" on
the appliance base, until the bowl locks into
place. The arrow on the bottom edge of the
mixing bowl must be exactly over the circle
mark on the appliance base.
2. Select a utensil and insert it in the mixing
bowl. How to correctly insert the individual
utensils is described below.
3. The mixing bowl and the corresponding
mixing or cutting utensil must always be
inserted before you put ingredients into the
bowl.
4. Place the lid on the mixing bowl. The filling
shaft of the lid should initially be positioned

saFety switch

The appliance is equipped with a safety switch that prevents the appliance from being operated if it
has not been assembled correctly. The appliance can only be switched on after all parts have been
mounted correctly.

using the chopping blaDe

1. Caution: Do not switch on the appliance wit-
hout first putting ingredients in the mixing
bowl, since this can damage the motor.
materials
For chopping
vegetables, fruits, bread and rolls for making bread crumbs, meat, chocolate,
nuts.
You will get very good results if you first cut the ingredients into about 1-inch
cubes.
Kneading dough
Use butter or margarine at refrigerator temperature and do not knead the
dough excessively long. Before using the dough after kneading, you should
knead it briefly on the worktop by hand.
and caution: the chopping blade and the
individual discs are very sharp: Danger
of injury. handle these utensils very
carefully.
so that the small nose that can be seen
beneath the filling shaft is in front of the
guide rail on the appliance base.
5. Now turn the lid clockwise until this nose
locks into the appliance base. You will hear
a loud click when this happens. The arrow
on the top edge of the mixing bowl must be
exactly under the circle mark on the lid.
6. To remove the lid, hold the mixing bowl with
one hand by the handle and turn the lid
counter-clockwise until the nose slips out
of the guide rail. Remove the lid from the
appliance.
7. To remove the mixing bowl, turn it in the
direction of the arrow to "Open" until it can
be removed from the appliance base by lif-
ting the handle.
2. Do not operate the appliance longer than
one minute at a time. After one minute, let
the appliance cool briefly before continuing.
19