Standards; Utilization Limits - BSVILLAGE EcoPAC 04 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Standards

CE standard conformity
The builder pool heat pumps meet the following standards:
Electromagnetic compatibility:
Safety requirements for low voltage equipment: 2006/95/EC
Pressure Equipment:
Noise production:
Harmonized standards:
Electrical connections
French standard installation reference:
Safety
Although this product contains all safety requirements, it may still present dangers such as:
Electrically controlled parts
Parts moving with automatic start-up (fan)
Cutting edges (evaporator)
In order to avoid accidents, prevent close access the appliance by children and pets. Never
cover the appliance whilst in operation and never put your fingers, or other objects inside.
Never turn on the appliance with any of its panels removed.
Pressure controller
The builder heat pumps are provided with HP pressure controller set at 30 Bar.

Utilization limits

To ensure the heat pump has been correctly sized, the builder must has been previously contacted with a
selection file (available on demand) in order to validate such selection.
"ECO" range heat pump models are designed to operate from 0°C to +35°C (50°F to 95°F) air
temperature using a pool cover.
If the machine is used to work with an ambient temperature below 0°, particularly for high water
temperatures, it is advised to add an electrical heater (ask your seller).
Regarding product selection that has not been validated by the builder and working outside the above
ranges; the builder dissociates its responsibility regarding any lack of performance.
Before installing the heat pump, you will have checked that the impedance of your swimming pool
electricity power supply shall not be more than 0.042 Ω.
Ask your electricity provider if necessary.
If the electricity provider can not adjust it, it could translate into a tension reduction on the power
supply for few seconds when the heat pump starts up.
Maximum water pressure : 2 bars (29 PSI).
Correct packing and storage position.
- 19 -
2004/108/EC
97/23/CE
200/14/CE
NF EN 60335.1,2.40
NF C 15 100.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ecopac 06Ecopac 08Ecopac 10

Tabla de contenido