Troubleshooting; Cleaning And Maintenance - HQ-Power VDSCD6001 Manual Del Usuario

7. Use
1. Cue
Press the play/pause button to start the disc. Press the cue button to determine a new cue point. When playback
is finished, the CD player will automatically return to the cue point.
2. Navigating through MP3 folders
The best way to organize all your MP3 files is to make folders.
a. Insert an MP3 CD into the player.
b. The LCD will display the folders.
c. Press the folder button. Use the track search buttons to scan through the named folders. Press the folder
button again to select the folder. The track list will be displayed.
d. Search through the track list with the track search buttons.
3. Matching the BPM
Match the tempo of both CD players by adjusting the pitch. Increase the fader of the slower tempo or decrease
the fader of the faster tempo in order to match both.

8. Troubleshooting

Problem Cause
No power - The power cord isn't connected.
- The fuse is melting.
No sound - Audio cable isn't well connected.
- Incorrect source selection.
- Incorrect audio setup.
Unable to play - No disc loaded.
- Defective disc.
- Disc is loaded upside down.
- Dirty disc.
- Parental control activated.
Key malfunction - Power wave or other static interference.

9. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections,
3. Moving mechanic parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts.
8. Contact your dealer for spare parts if necessary.
VDSCD6001_v3
Solution
- Connect the power cord properly.
- Replace the fuse with a fuse of the same type
and rating
- Connect the cable properly.
- Switch to the proper source.
- Select the suitable audio setup.
- Load a disc.
- Replace the disc.
- Load the disc properly.
- Clean the disc.
- Deactivate the parental control or change
setup.
- Switch off the player, switch on again.
9 HQPOWER