Before Installing - StetSom HIGH LINE HL2000.4 Manual De Usuario

Features
The HL2000.4 has 4 channels divided into front (FRONT) and rear (REAR)
channels with independent controls:
• Level: Adjusts the level of the input signal;
• Crossover: Lets you choose between Low-Pass, High-Pass or Flat (Full-
Range) performances.

Before installing

Please read this manual carefully.
You must follow the instructions for the product's installation and
connections correctly.
If necessary, contact our company.
• All connections, such as battery (power), output signals for loudspeakers
and input signals, can be made easily and safely with screw terminals and
RCA connectors. All connections must be made with circuit breakers and/
or fuses turned OFF.
• Use good quality cables and suitable gauges to increase sound fidelity and
avoid possible power losses.
• For safety reasons, put all power cords and loudspeaker cords in
appropriate wire harnesses.
• To avoid damaging the cables, make sure that they do not touch any
pointed or sharp metal edges.
• Keep all cables as far away as possible from the ignition cables, electronic
injection modules and starter switches, since they can generate interference
and noise in your audio system.
Use a 95A fuse or circuit breaker within 30cm of the battery for system
protection.
If in doubt, contact the store where the purchase or installation was made. For
more information please contact our Customer Service: BR +55 18 2104-9412.
11
US