Technical Specifications - StetSom HIGH LINE HL2000.4 Manual De Usuario

Technical Specifi cati ons
Number of Channels:
Power @ 13.8V 1Ω Stereo:
Power @ 13.8V 2Ω Stereo:
Power @ 13.8V 2Ω Bridge:
Power @ 12.6V 1Ω Stereo:
Power @ 12.6V 2Ω Stereo:
Power @ 12.6V 2Ω Bridge:
Minimum Output Impedance (Stereo):
Minimum Output Impedance (Bridge):
Input Impedance:
Minimum Input Sensiti vity:
Total Harmonic Distorti on:
Signal to Noise Rati o:
Frequency Response (-3dB) @ 1 Ohm:
Low Pass Crossover Switch:
High Pass Crossover Switch:
Bass Boost (Low Pass):
Power Supply Voltage:
Musical Consumpti on:
BASS Consumpti on:
Dimensions (H x W x L):
Weight:
EU Declarati on of Conformity (DoC):
HL2000.4 - 1 OHM: www.stetsom.com.br/certi fi cati ons/HL2000_4_stamped_signed.pfg.pdf
The measurements given above were determined with equipment in the STETSOM
laboratory. A frequency of 1Khz with THD+N to ≤10% in impedances was used as a
reference in each measurement. The electronic components and the manufacturing
process can vary slightly and cause small variati ons in the measurements.
4
4 x 500 WRMS
4 x 338 WRMS
2 x 1000 WRMS
4 x 435 WRMS
4 x 280 WRMS
2 x 870 WRMS
1 Ohms
2 Ohms
15 Kohms
0.2V
> 0.4 % THD
> 90 dB
20Hz - 16KHz
90 Hz
90 Hz
+12 dB
9 - 15V
97A
194A
77.5 x 235 x 240.5 mm
2.83 Kg
17