Daga PM-145 Instrucciones De Uso página 16

ENGLISH
button again and the screen will display "dEL yES". If you are sure that
you want to delete the information saved in the memory, press the On/
Off button to delete.
Select user
Press the SET button (C) in order to choose between user 1 and 2, with
the product turned off. The screen will display the user selected and the
memories recorded on the device for this user. Press the button again
to move from one user to another, depending on who you want to check
the memories or take a reading for.
Delete reading record from the memory
If you are sure that you wish to delete all of the memories saved in the
device, press the settings button 7 times with the device turned off,
until CL is displayed on the screen. Then press the on/off button, and
the letters CL will flash 3 times and the reading records will be deleted.
Then press the memory button and NO will appear on the screen, mea-
ning that there are no memories saved on the device.
To ensure that the values are comparable, always take a pressure rea-
ding at the same time of day.
If you want to perform more than one reading for the same person, wait
5 minutes between readings.
Repeat the reading if you do not trust the validity of the reading values.
In the event that you believe that the results are not correct, take the
appliance to a Technical Support Service.
As this is a home use product, it does not need to be calibrated.
16