burgbad M1001 Instrucciones De Montaje página 37

BATHTUB CAMIA / INSTALLATION
1. Mark out and drill the 4 attachment holes.
2. Fix the fl oor attachment bracket loosely using suitable screws. Push the bracket to the centre as
far as the stop.
3. Fit the odour trap with click valve to the bath.
4. Move the bath into position and align. Screw the bath to the fl oor attachment bracket with
both fi xing screws and tighten the fl oor fi xing screws.
5. Connect the odour trap to the waste water pipe (DN50).
6. Fix the inspection fl ap to the bath by the magnetic holder.
Silicon
We recommend sealing the bath all round with silicon. For sealing use only a transparent, solvent free
silicon. Solvent-based silicons can damage the colour coating of the bath.
GB
Wannen-
kontur
37