Beem Multi-FiXX 500 Manual De Instrucciones página 26

Multi-FiXX 500
Chopping
(see images B1 - B5)
Place the jug (3) onto the motor unit
‹
(1) with the handle to the right and
turn the blender jug clockwise until it
audibly snaps in.
Put the chopping blades (7) onto the
‹
spindle attachment (4) and press the
chopping blade downwards to that the
spindle attachment snaps in.
WARNING
Danger from sharp blades!
► Do not touch the blades. Always hold
the chopping blade by the plastic
shaft.
Put the spindle attachment (4) with fit-
‹
ted chopping blade (7) onto the drive
spindle of the jug (3).
Put the food to be chopped into the
‹
jug (3).
NOTE
► Pay attention to the maximum filling
quantity in the blender jug (3). Only
fill liquid up to the "Max. Liquid"
marking.
Put the jug lid (8) onto the jug (3) and
‹
lock it by turning it clockwise.
Insert the pusher (9) into the filling
‹
shaft of the jug lid (8).
24
NOTE
► Make sure that the jug (3) and
the jug lid (8) are seated properly,
otherwise the appliance cannot be
operated (safety switch).
► Make sure that the pusher (9) is
inserted into the jug lid (8) during
operation to prevent squirting out of
the appliance.
Insert the plug into the mains socket
‹
and move the rotary switch (2) to im-
pulse or continuous operation.
CAUTION
► Observe the maximum operating
time of 2 minutes.
► Allow the appliance to cool down for
1 minute.
Refilling:
Switch off the appliance.
‹
Remove the jug lid (8) and fill the
‹
jug (3).
Put the jug lid (8) onto the jug (3)
‹
again and lock it by turning it clock-
wise.
NOTE
► Pay attention to the maximum filling
quantity in the blender jug (3).
► Before emptying the jug, remove the
spindle attachment (4) with the chop-
ping blade (7).
BEEM - Elements of Lifestyle
EN