INTERTECHNO ITDW-854 Manual De Instrucciones página 28

GB
The wireless-dimmer-wall transmitter is suitable for switching on/
off and dimming all self-learning wireless-dimmer-receivers made by
intertechno. Wireless-adapters and insert switches for all light sources
(such as LEDs) are available.
The battery fuse must be removed first. Fig. 1
Refer to the section on changing batteries for more information.
Before closing the compartment, the slide switch
on the inside can be moved to Position 1 for all
self-learning wireless receivers and wireless receivers
which feature a scene storage function.
In this position, you can dim lights in small increments using the adjust-
ment wheel.
Position 2 is only available to wireless receivers
with the X3 scene storage function.
This enables stepless dimming.
CODING-Teaching in a wireless receiver
To adjust the encoding, please also read the operating instructions of
your self-learning wireless receiver.
1.) Put the wireless receiver in learn mode.
2.) A single turn of the wall transmitter's adjustment wheel sends the ON
signal. The LED will light up green and the radio receiver takes over
the coding.
Erasing encoding
To erase the encoding, repeat steps 1.) to 2.) as above, but press twice to
send the OFF signal.
The LED will light up red 2x.
Mounting Fig. 2
Easy to install mounting plate!
The mounting plate is easy to affix on glass, wood, wallpaper or tiles.
Double-sided adhesive tape and screws are included.
Caution: Avoid shielding through metal objects.
Operating instructions
ITDW-854
3
3
›