BabyGo FreeMove Instrucciones De Montaje página 20

BabyGO
1. Pull out the metal yoke from the back of the restraint (fig.9).
2. Remove the shoulder pad from the metal yoke (fig.10/11).
3. From the front of the car seat, pull the shoulder straps through the harness slot (fig.12).
4. Lift the base cover, then take off the "E" style buckle from the link buckle strap (fig.13).
5. Remove the buckle from the base (fig.14).
6. Remove the metal yoke from the adjuster strap (fig.15).
7. Remove the adjuster strap from the base (fig.16). Adjust the head rest to the proper height
(fig.6).
8. Place the seat on a forward-facing vehicle seat and adjust the headrest to the suitable positi-
on, then place the child in the car seat (fig.17).
9. Pull the 3-point belt (lap and shoulder belt) through the belt guide slot at the car seat base
and back part of the car seat. Please make sure that the seat belt lays flat and is not twisted.
Choose proper height of the shoulder belt slot at the back part of the car seat to fit the child's
body. Put the two buckle clips together, then fasten buckle and harness clips until you hear a
noticeable "click" (fig.18).
Group II+III (for children 15 – 25 kg) without a backrest
1. Halten Sie die Rückenlehne fest und drücken Sie sie nach hinten. (Abb. 19)
1. Hold the backrest, then push it over toward the level (fig.19).
2. Press the base with your hand, and pull the backrest out from base with your other hand
(fig.20/21).
20
BabyGO • www.babygo.eu
ASSEMBLY INSTRUCTION
Motion | Sportline
FreeMove | GoSafe