Procedure:
Step 1: Unscrew the fixation screws of the protective shield.
Step 2: Remove the protective shield.
Step 3: Remove the old lamp from the lamp-socket.
Step 4: Insert the new flash-tube into the lamp-socket.
Step 5: Replace the protective shield and tighten the screws.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Flash-rate:
Dimensions (LxWxH):
Weight:
Fitting lamp:
Maximum ambient temperature t
Maximum housing temperature t
Please note: Every information is subject to change without prior notice. 12/01 ©
Only operate this device with fixed protective shield!
230 V/50 Hz
15 W
5 Hz
160 x 100 x 100 mm
300 g
Flash-tube U-shape
No. 85012000
:
45° C
a
(steady state):
90° C
B
11