Installing A J-Model In An Existing Wall Case - GE AJCH 08 ACB Manual Del Propietário

INSTALLING A J-MODEL IN AN EXISTING WALL CASE

Read these instructions completely and carefully.
REMOVE LOCKING PLATE ON
1
FRONT LEFT SIDE
Locking
plate
Remove
screw
2 REMOVE THREE SHIPPING PADS
INSIDE AIR CONDITIONER NEXT TO
COMPRESSOR
3 CAREFULLY SLIDE AIR
CONDITIONER BACK INTO CASE
Make sure that the tubing on the unit does
not touch the wall case and that the case
installation is secure.
Installation Instructions
Remove
shipping
pads
14
REINSTALL LOCKING PLATE WITH
4
TAB BEHIND WALL CASE FLANGE.
TIGHTEN SCREW
ATTACH POWER CORD TO BASE
5
PAN WITH CLAMP
6 WHEN WALL OUTLET IS TO LEFT,
EXTEND CORD UNDER UNIT AND
HOLD IT IN PLACE WITH CLAMP
7 ATTACH FRONT GRILLE
An opening for the power cord is on the
bottom of the front grille.
Base pan
Power
cord
Clamp
Power
cord
Clamp