Publicidad
Idiomas disponibles
Idiomas disponibles
IbWARNING
Electrical Shock Hazard
Unplug power cord from electrical
outlet.
Do not operate the vacuum
cleaner without the motor safety filter.
Be sure the filter is dry and properly
installed to prevent motor failure and/or
electrical
shock.
MOTOR SAFETY FILTER
ELECTROSTATIC
This filter must be replaced when dirty, it
should be replaced
regularly depending
on
use conditions.
The filter
CANNOT
be
washed
as it will lose its dust trapping
ability.
NOTE: See PARTS AND FEATURES
for
Filter Number.
1. Remove the bag as outlined
in the BAG
CHANGING
section.
2. Lift the rubber
retainer and pull
out motor safety fil-
ter as shown.
4. Replace the bag as
CHANGING
section.
3. Replace the filter,
white side out, by
sliding it back into
place under the ribs
in the bag cavity.
Tuck filter in so that
it fits completely
under the rubber
retainer.
outlined
in the BAG
WARNING
EXHAUST FILTER
HEPA
The HEPA filter must be replaced when
dirty.
Replace the filter when the entire sur-
face area is covered evenly.
The filter
CANNOT
be washed as it will lose its
dust trapping
ability.
NOTE: See PARTS AND FEATURES
for
Exhaust Filter Number.
1. Pull out and up
on the exhaust fil-
ter cover to
remove from the
canister and lay
aside.
14
Exhaust_
Filter
_
_
2. When the
_
xhaust filter
becomes dirty,
remove it by pulling
straight up.
3. Place the new
filter into the canister
with the foam seal
down.
Tab
Slot
Exhaust
4. Reinstall the
exhaust filter
cover by inserting
the tab into the
slot in the
canister. Press
firmly to snap
_
exhaust
filter
J cover into place.
Publicidad
